Blog

The way concrete cures, it never truly stops. The longer a structure stands, the stronger the concrete is. However, for job site purposes, a standard window of 28 days is used for curing time. Check Commercial Concreting Info!

Wire mesh is more cost-effective, because it uses thinner steel wires woven into a sheet rather than thick bars. Generally speaking, however, the thicker the rebar, the more sturdy the reinforcement. Check Commercial Concreting Info!

When pouring concrete, avoid using sand for a base. Check Commercial Concreting Info! With sand, as opposed to gravel, there is a higher risk of cracking and lower durability in the long run. The sand can also erode much more quickly than a gravel base would.

UHPC, or Ultra High Performance Concrete, is able to bear the most weight at 17,000 pounds per square inch. The mixture itself is typically altered depending on the specific ductility and durability requirements. Visit: Commercial Concreting Page!

Rebar is typically used to reinforce concrete walls in buildings and connected slabs, but it is not necessary for every concrete job. For driveways, rebar is not necessary. For projects with five inches or more of depth, rebar is recommended as a rule of thumb. Visit: Commercial Concreting Page!

While prepping for a slab, it is necessary to place a layer of gravel as a base. Not only does this allow for a stronger slab with a thicker, sturdier base, but it also improves drainage and prevents pooling beneath the concrete. Visit: Commercial Concreting Page

Concrete, the most commonly used building material, is a mixture of water and cement, along with aggregates to bulk up the consistency. Learn Basement Excavations Information! Some aggregates include sand and gravel, in differing ratios depending on the task.